FSD-804P

หมวดหมู่สินค้า: NET-PoE Switch
รหัส : FSD-804P
8 Port 10/100Mbps with 4 Port PoE Switch
ราคา 4,700บาท

แท็ก: 10/100PoESwitchPlanet

29 พฤศจิกายน 2560

ผู้ชม 985 ผู้ชม

Cost-effective Centralized Power Distribution
PLANET FSD-804P is equipped with eight 10/100BASE-TX ports, four of which are 802.3at PoE+ copper interfaces. For cost saving and flexible use of PoE power provision, half of the 10/100Mbps TP ports of the FSD-804P provide PoE power injector function which is able to drive 4 IEEE 802.3at/af compliant powered devices. For SOHO or department network, the Switch also provides a simple, cost-effective and highly-reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging Ethernet and Fast Ethernet workgroups or networks.
 
 
Ethernet Data Transmit Distance Extension
The built-in solid DIP switch provides “Standard” and “Extend” operation modes. The FSD-804P operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. In the “Extend” operation mode, the FSD-804P operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 200 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FSD-804P provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation.
 
 
Environment-friendly, Fanless Design for Silent Operation
The FSD-804P comes with a desktop-sized, compact metal housing, making the placement of the unit convenient. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Moreover, the FSD-804P is able to operate reliably and stably in any environment without affecting its performance. The deployment of PoE PDs with constant power feeding can be easily and quickly done.
 
Easy Cable Connection
With data switching and power over Ethernet integrated into one unit, the FSD-804P reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 4 PoE interfaces, the FSD-804P is ideal for small businesses and workgroups making the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efficient and more cost-effective.
 

 

Physical Port
  • 8-port 10/100BASE-T Fast Ethernet RJ45 copper
  • 4-port IEEE 802.3at/af PoE Injector (Port-1 to Port-4)
Power over Ethernet
  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 4 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 53V DC power to PoE powered device
  • 60-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode, 200m with extended mode
Switching
  • Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 200m at speed of 10Mbps (Only for Port1 – Port4)
Hardware
  • 8.5-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • Fanless design
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
  • Supports 4000VDC Ethernet ESD protection

 

Hardware Specifications
Hardware Version 4
10/100BASE-TX MDI/MDIX Ports 8
PoE Injector Port 4 ports with 802.3at/af PoE injector function with Port-1 to Port-4
Switch Architecture Store-and-Forward
Switch Fabric 1.6Gbps/non-blocking
Switch Throughput@64 bytes 1.19Mpps@64 bytes
MAC Address Table 1K entries, automatic source address learning and aging
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
LED System:
 Power (Green)
 PoE max. (Green)
10/100BASE-T RJ45 Interfaces:
 10/100Mbps LNK/ACT(Green)
 PoE Interfaces:
 PoE-in-Use (Orange)
ESD Protection 4KV DC
ESD Protection 4KV DC
DIP Switch Selectable operation mode
■ Standard
■ Extended
Dimensions (W x D x H) 215 x 133 x 42 mm (1U height)
Enclosure Metal
Weight 880g
Power Requirements AC 100~240V, 50/60Hz, 2A max.
Power Consumption/Dissipation Max. 65 watts/223 BTU
Thermal Fan Fanless
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
PoE Power Output Per port 53V DC, 600mA. max. 30 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 60 watts
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 2
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

 

Department/Workgroup PoE Switch
Providing four 802.3at PoE+ in-line power interfaces, the FSD-804P can easily build a power source that centrally controls the enterprises’ IP phone systems, IP camera systems and wireless AP systems. For instance, up to 4 cameras can be installed around the corner in the company for surveillance demands or up to 4 wireless APs can be built to have a wireless roaming environment in the office. Without the power-socket limitation, the FSD-804P makes the installation of cameras or wireless APs more easily and efficiently.
 
 
 
Engine by shopup.com