• Eight 10/100Mbps Fast Ethernet PoE+ ports and two 10/100/1000Mbps combo ports
• IEEE 802.3af/at PoE compliant for simplified deployment and installation
• Up to 30W per port (total power budget: 160W) for powering PoE-enabled devices
• Auto-detection of power devices(PD) and power consumption levels
• IEEE 802.1Q VLAN allows network segmentation to enhance performance and security
• Switch capacity: 2.8Gbps
• IGMP Snooping V1 / V2 supported
• 4K MAC address table supported
• 13-inch rack-mountable metal case

IEEE 802.3at Power over Ethernet (PoE+) Auto Detection
The ES-5208P features 8 IEEE 802.3at Power over Ethernet (PoE+) ports that supply up to 30 watts of electricity per port. It can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-5208P features PoE+ device detection to verify whether individual, connected devices are IEEE 802.3at compliant or not, so only data will be sent via the LAN cable if the device is not a PoE or PE device. Various PoE products such as Access Points, IP cameras or IP phones are easily connected to the switch, making it the perfect solution when power outlets are difficult to install or existing power outlets are too far from devices.

Cost-Effective, No Special Networking Cable Required
Reduce your installation time and cost by using a standard Cat-5e Ethernet cable to link between the ES-5208P switch and powered devices (PD). The Ethernet cable will then transmit both data and power, so you won't need all those extra power cables to your powered devices (PD).

Smart Features Supported
The ES-5208P Web smart features can be managed through a Web Browser. The smart features include simple QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5208P also supports bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic and QoS to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely. It increases the IT manager‘s mobility.

High Performance
The ES-5208P switch also supports auto-negotiation and non-blocking wire speed to give you the maximum speed and highest performance possible for each device connected to your network.

• Auto-Negotiation

• Non-Blocking Wire Speed

Power Saving
Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-5208P offers environmental efficiency . To comply with the IEEE802.3az standard, the ES-5208P provides power saving functionality to reduce energy consumption and save costs:

• Inactive Link Detection

• Cable Length Detection